Metal Detecting Forums

Metal Detecting => Equipment and Gear => Topic started by: esawyja on November 28, 2016, 08:37 AM

Title: Pulse Induction Metal Detector
Post by: esawyja on November 28, 2016, 08:37 AM

Hi all,
I took the plunge and bought a PI kit from Sven
http://www.treasurelinx.com/mirage_pi.html

My question is, does anyone have experience with the kit and what kind of coil should I build for this. Any good instructions on how to build a coil for the PI, or someone that build these kind of coils?

Regards

Title: Re: Pulse Induction Metal Detector
Post by: Paul van Heerden on November 28, 2016, 10:50 AM

Welcome. There are a few of us here that have build PI machines. Louis Kriedeman though is the master of coil building. Maybe send him a message and see if he could give you some advice

Title: Re: Pulse Induction Metal Detector
Post by: Tony Curnick on November 30, 2016, 06:01 AM

Yip...Louis

Title: Re: Pulse Induction Metal Detector
Post by: esawyja on December 01, 2016, 08:06 AM

Thanks I will do so